Nokia 2865 ES - Manual (Page 59)

S e t t i n g s
58
Data and fax calls
Data and fax calling is a network service. See "Network services," p. 6. If your
network operator supports this feature, you can set up the device to send or
receive data and fax calls when connected to a device such as a PDA or PC.
Receive data or fax calls
For better performance during data or fax calls, place the device on a stationary
surface. Do not move the device or hold it in your hand during a data call.
If your wireless service provider supports this feature, you can set up the phone
to send or receive data or fax calls when a terminal, such as a PDA or PC, is
connected. See "Network services," p. 6, for more information.
For more information on connectivity, refer to the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
http://www.nokiausa.com.
1. Select Menu > Settings > Call > Data/fax calls > Incoming data/fax call
and view the following options:
Normal —The phone receives incoming calls as usual.
Data calls only —The phone receives only data calls.
Fax calls only —The phone receives only fax calls.
2. Select Data calls only or Fax calls only .
3. When you are finished receiving the fax or data call, repeat steps 1 and 2,
and select Normal .
View data transfer
To view the transmission speed when sending or receiving data or fax calls, select
Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off .
Call summary
To view the time spent on a call when you hang up, select Menu > Settings >
Call > Call summary > On or Off .
Show call time on display
To view the call time during the phone call, select Menu > Settings > Call >
Show call time on display > On or Off .