Nokia 2865 ES - Manual (Page 68)

S e t t i n g s
67
1. Select Menu > Settings > Security .
2. Enter the lock code, and select OK .
3. Select Allowed no. when phone locked > Assign and one of the three slots.
4. Enter the phone number, or select Search to retrieve the number from the
phone book; select OK .
To place a call to an allowed number when the phone is locked, enter the allowed
number and press the call key.
Change lock code
When changing the lock code, avoid using codes similar to emergency numbers
to prevent accidental dialing of an emergency number.
If you enter an incorrect lock code five times in a row, your phone may ask you for
the security code. By default, the security code is the five-digit number, 12345.
To change the phone lock code, do the following:
1. Select Menu > Settings > Security .
2. Enter the current lock code, and select OK .
3. Select Change lock code .
4. Enter the new lock code (only 4 characters), and select OK .
5. Enter the new lock code again for verification, and select OK .
When you change your lock code, make sure to remember it. If necessary, write
it down and store it in a safe place away from your phone.
Call restrictions
Call restrictions allows you to block or permit numbers for incoming or outgoing calls.
1. Select Menu > Settings > Security .
2. Enter the lock code, and select OK .
3. Select Call restrictions and the type of calls you wish to restrict:
Restrict outgoing calls —Set restrictions on making calls.
Restrict incoming calls —Set restrictions on receiving calls.
4. Select whether to block or allow numbers:
Blocked numbers —Set numbers that are blocked on incoming calls, allowing
all other numbers. When a number is blocked, the call is sent to voice mail.
Allowed numbers —Set numbers that are allowed, blocking all other numbers.