NetComm Router N300 - Manual (Page 3)

3G Connections
1. the router will attempt to automatically detect the connection details from your
3G USb modem. this will take up to 2 minutes.
2. if the 3G APN connection details are successfully detected you will be able to
instantly access the internet.
Note: Please refer to the Setting up your 3G router section in the user guide (on CD) if you have any problems connecting to the internet, or if:
• Your SIM card requires a PIN code
• Your 3G broadband service provider requires you to input the username/password for your 3G connection
• You wish to use alternate 3G connection details (such as a special APN)
Non 3G Connections
1. on your computer, open a web-browser (such as internet explorer, Firefox, or
Safari) and type in 192.168.20.1 into the address bar.
2. At the login screen type admin into both the username and password fields.
then click submit.
3. mouseover Internet Settings and click on WAN.
4. Select your WAN connection type from the drop box.
5. enter the relevant information in this screen as supplied by your iSP.
6. Click on Apply to save the settings and wait 2 minutes.
7. the internet connection status can be determined by clicking on status from the
menu after logging in to the router.