Netopia 4553 - Manual (Page 187)

Monitoring Tools 12-187
Traffic Statistics
When ATM is the mode or Frame Relay is the datalink encapsulation, traffic statistics are available through the
option in the lower left corner. With other settings, this option is not available. To view the traffic statistics,
select the option and press Return.
A table of ATM VC Statistics (for ATM) or DLCI Statistics (for Frame Relay) appears. The table gives the following
information:
DLCI or VPI/VCI: The DLCI number or vir tual path or channel identifier, as you have configured it
Remote IP Addr: For DLCIs, the remote IP network address
IPX Net: For DLCIs, the remote IPX network address, if any
Local IP Addr: For VCs, the local IP network address
Frames Rx: The number of frames received
Frames Tx : The number of frames transmitted
Bytes Rx: The number of bytes received
Bytes Tx : The number of bytes transmitted
System Information
The System Information screen gives a summar y view of the general system level values in the Netopia 4553.
From the Statistics & Logs menu select System Information. The System Information screen appears.
The information display varies by model, firmware version, feature set, and so on. You can tell at a glance your
par ticular system configuration.
System Information
Serial Number ff-70-00 (16740352)
Firmware Version 50d70
Processor Speed (MHz) 50
Flash ROM Capacity (MBytes) 2
DRAM Capacity (MBytes) 16
Ethernet Single 10/100 Port
WAN Interface ATM SDSL