Configuring telnet software, Connecting a console cable to your router, Connecting a console cable to – Netopia 4553 User Manual

Page 27: Attaching the console cable, see

Advertising
background image

Console-Based Management 5-27

Configuring Telnet software

If you are configuring your router using a Telnet session, your computer must be running a Telnet software
program.

If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet
from the Star t menu.

If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia 4553
CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.

Connecting a console cable to your router

You can per form all of the system configuration activities for your Netopia 4553 through a local serial console
connection using terminal emulation software, such as HyperTerminal provided with Windows 95, 98, 2000, or
NT on the PC, or ZTerm, included on the Netopia CD, for Macintosh computers.

The Netopia 4553 back panel has a connector labeled “Console” for attaching the Router to either a PC or
Macintosh computer via the serial por t on the computer. (On a Macintosh computer, the serial por t is called the
Modem por t or Printer por t.) This connection lets you use the computer to configure and monitor the Netopia
4553 via the console screens.

To connect the Netopia 4553 to your computer for serial console communication, use a console cable
appropriate to your platform:

A DB-9 connector end attaches to a PC.

A mini-DIN8 connector end attaches to a Macintosh computer depending on your computer’s serial bus
type. Since Macintosh computers have different serial bus connectors, you will need a mini-DIN8-to-DB-9
adapter. These are available from a variety of third-par ty manufacturers.

A DB-9 end of the Console cable attaches to the Netopia 4553’s Console por t.

If you connect a PC with Microsoft Windows 95, 98, 2000, or NT, you can use the HyperTerminal
application bundled with the operating system.

If you connect a Macintosh computer, you can use the ZTerm terminal emulation program on the supplied
Netopia 4553 CD.

Console connection por t
DB-9 (male)

Console

Power

DSL

10/100
Ethernet

Advertising