Netopia 4553 - Manual (Page 57)

WAN and System Configuration 7-57
System configuration screens
You can connect to the Netopia 4553’s system configuration screens in either of two ways:
■ By using Telnet with the Router’s Ethernet por t IP address
■ Through the console por t, using a local terminal (see “Connecting a console cable to your router” on
page 5-27 )
You can also retrieve the Netopia 4553’s configuration information and remotely set its parameters using the
Simple Network Management Protocol (see
“SNMP” on page 12-188 ).
Open a Telnet connection to the router’s IP address; for example, “192.168.1.1.”
The console screen will open to the Main Menu, similar to the screen shown below:
Navigating through the system configuration screens
To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
This par ticular path guide shows how to get to the Network Protocols Setup screens. The path guide represents
these steps:
1. Beginning in the Main Menu, select System Configuration and press Return. The System Configuration
screen appears.
Netopia Router
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
Main
Menu
IP Setup
System
Configuration