NorthStar Navigation Class B Transceiver NAIS-300 - Manual (Page 16)

16 Configuration
For security reasons the MMSI of the vessel cannot
be changed once programmed. Do not programme
the MMSI unless you are certain you have the
correct information. Please check the number
entered carefully. If the MMSI programmed is
incorrect the AIS transponder will need to be
returned to the supplier for factory reset.
Should it become necessary to change your MMSI, for
example, if you wish to re-install your NAIS-00 into a
new vessel; you will need to contact your local Navico
dealer about reprogramming a new number.
If no MMSI is entered the AIS transponder will operate in
receive only mode. The vessels own position will not be
transmitted. An MMSI must be entered to allow the AIS
transponder to transmit its own position to other vessels.
For a more detailed description of how to configure your
NAIS-00, please refer to the application user guide on the
CD supplied with the unit.
 