Figure 5 – Nortel Networks 1110 User Manual
Page 25
Connect the components
25
Figure 5: IP Phone 1110 connections
3.
Install the handset. Plug the end of the handset cord with the short
straight section into the handset. Plug the end of the handset cord
with the long straight section into the handset jack on the back of the
phone (see
) marked with the symbol
+
. Form a small bend
in the cord, and then thread it through the channel in the stand base
marked with the symbol
+
so that it exits in the handset cord channel
on the right-hand side of the stand base (see
4.
Install the LAN Ethernet cable. Plug one end of the supplied LAN
Ethernet cable into the LAN ethernet port on the back of your phone
(see
) marked with the symbol
% and thread the cable
through the channel in the stand base marked with the symbol
%.
Connect the other end of the cable to your LAN Ethernet connection.
5.
Install the PC Ethernet cable (optional). If you are connecting your
PC Ethernet through the phone, plug one end of the PC Ethernet
cable (not supplied) into the PC ethernet port on the back of your
phone (see
) marked with the symbol
( and thread the
cable through the channel in the stand base marked with the symbol