NETGEAR DGN2000 - Manual (Page 44)

40 Technical Specifications
Default Configuration
You can use the Wireless On/Off and WPS buttons that are located on the side of your router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will
return to the factory configuration settings that are shown in the table below.
Interface Specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
Feature Default Behavior
Router Login
User Login URL http://www.routerlogin.net or http://www.routerlogin.com
User Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use Default address
WAN MTU Size 1500
Port Speed AutoSense
Local Network (LAN)
Lan IP 192.168.0.1
Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication None
DHCP Server Enabled
DHCP Starting IP Address 192.168.0.2
DHCP Ending IP Address 192.168.0.254
DMZ Disabled
Time Zone GMT