Enabling voip connections, Enabling voip connections -9 – NETGEAR ADSL2+ Modem Router DM111PSPv2 User Manual

Page 57

Advertising
background image

ADSL2+ Modem Router DM111PSPv2 User Manual

Advanced Configuration

4-9

v1.0, December 2008

Enabling VoIP Connections

You can use the NAT ALG (Network Address Translation/Application Level Gateway)

settings to

allow simultaneous VoIP phone calls.

To specify the NAT ALG configuration:

1. In the Advanced section of the main menu, select NAT ALG to display the following screen:

2. Select the Enable SIP ALG check box to allow VoIP clients to make two or more

simultaneous VoIP phone calls through the modem router.

3. Click Apply to save the settings.

4. Reboot the modem router so that the new settings take effect.

Figure 4-6

Advertising
See also other documents in the category NETGEAR Hardware: