NetComm 802.11 - Manual (Page 49)

YML800NX Power 800NX Power X Power Power n User Guide
www.netcomm.com.au 
802.11n Wireless Router
Add Port Forwarding
Fill in the “Description” , “Local IP”, “Local Port”, “Type” and “Public Port” of the setting to be added and then click
<Add> button. Then this Virtual Server setting will be added into the “Current Port Forwarding Table” below. If you
find any typo before adding it and want to retype again, just click <Clear> and the fields will be cleared.
Remove Port Forwarding
If you want to remove Port Forwarding settings from the “Current Port Forwarding Table”, select the Port Forwarding
settings you want to remove in the table and then click “Delete Selected”. If you want to remove all Port Forwarding
settings from the table, just click the <Delete All> button. Click <Reset> will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations.