Netac Tech C670 User Manual
Page 2
FM, LINE-IN, Mic, then press to enter “Enc” setting.
Enc
Select”Enc”, and you can set the format of record by press
as:MP3,
IM ADPCM, MS ADPCM or PCM, then press to enter “Channels” setting.
Channels
Select”Channels”, and you can set the channel of record by press
as:
Stereo or Mono, then press
to enter “Save” setting.
Note: When the setting of “Source” is “Mic”, the channel only can be set as
“Mono”.
Save
Select”Save”, and you can set the save position of record file by press
as: Internal or External, .then press
to enter “Sample” setting.
Sample
Select”Sample”, and you can set the Sample by press
. When the
setting of “Enc” is “MP3”, Sample can be set as: 32000Hz or 44100Hz. When
the setting of “Enc” is “IM ADPCM / MS ADPCM / PCM”,Sample can be set as:
8000HZ, 11025HZ, 16000HZ, 22050HZ or 32000HZ.Then press to enter
“BitRate” setting.
BitRate
Select”BitRate”, and you can set the Record BitRate by press
. When
the setting of “Enc” is “MP3”, BitRate can be set as 96kbps. When the setting
of “Enc” is “IM ADPCM / MS ADPCM / PCM”, BitRate is disable. Then press
to enter “EXIT” setting.
EXIT
Select ”EXIT”, press
to exit REC-SETUP mode, go back to main menu
of MP3 Player.
INFO
Enter INFO menu, press
can browse system infomation of MP3 Player,
including: F/W Ver, Int Media and Ext Media. Press
can exit INFO menu,
and go back to main menu of MP3 Player.
EXIT
Select “EXIT”, press
to exit main menu of MP3 Player.
SETUP.
When enter SETUP menu, please press
/
to select the submenu. The
operation of setting are as follows:
EQ
Select “EQ”, press
to enter, and you can select the sound mode of
music playing by press
/
as: NORMAL, ROCK, POP, JAZZ, or
CLASSICAL. After setting, press
again to go back to SETUP menu.
PLAY MODE
Select “PLAY MODE”, press
to enter, and you can select the mode of
music playing by press
/ as: NORMAL, REPEAT TRACK, REPEAT ALL,
SHUFFLE. After setting, press
again to go back to SETUP menu.
ERASE
Select “ERASE”, press
to enter, and you can delete any MUSIC/LINE-
IN/MIC file by press
/
or exit.Select the file you want to delete, press
to affirm, then operate by the clew of LCD. Selsct “EXIT”, press
to exit “Erase a file” and go back to SETUP menu.
BACKLIGHT
Select “BACKLIGHT”, press
to enter, and you can set the LCD back-
light of MP3 Player by press
/
as: 0-60 seconds. After setting, press
again to go back to SETUP menu.
Other Information
Cautions
1)
“M***.mp3” is title reserved for LINE-IN/MIC/FM recorded files in MP3
Player. Please avoid renaming music files to such titles before copy
them to MP3 Player. Otherwise they cannot be played back under
MUSIC MODE. The “***” is “0-9”.
2)
There is a system file named “SETTINGS.DAT” under the root directory
of MP3 Player to store all settings before its power off. If that file is
deleted, all settings will restore to default status.
3)
Netac Technology Co., Ltd. is not responsible for any loss arising out of
using Netac MP3 Player. The governing laws for this product are laws
of the People’
s Republic of China.
Troubleshooting
If you experience any of the following difficulties in using MP3 Player, use
this troubleshooting guide to help you solve the problem. Should any problem
persist, consult Netac Customer Service.
The Player does not function
The battery is exhausted. Please change it!
Make sure the battery is inserted correctly.
The buttons do not operate
The buttons are locked. Make sure the “Hold” switch is OFF.
No sound
Make sure the earphone port is connected securely.
Adjust the volume with
.
Unable to connect to the PC
MP3 Player is not power on. Please power on MP3 Player and connect it to
your computer through the USB Cable.
Make sure the USB Cable is correctly connected. Please disconnect and
then connect the Cable to MP3 Player.
Driver has not been installed. Please refer to “Driver Installation on Windows 98”.
Unable to download MP3 files
Format your MP3 Player and re-download the files.
Cannot record files
The available memory space in MP3 Player may be insufficient. Please delete
some files first.
The amount of files stored in MP3 Player may be reach the maximum of the
system. Please delete some files first.
Contact Netac
Netac Technology Co., Ltd.
6F, Incubator Building,
China Academy of Science & Tech Development,
No.1 High-tech South St,
Shenzhen, China 518057
Tel:
+86-755-26727800
(Switchboard)
+86-755-26727500, 26727510, 26727520 (Technical Support)
Fax:
+86-755-26727610, +86-755-26727620
Website:
http://www.netac.com
Email:
(Sales)
(Technical Support)
(Feed back)
Items
LCD
File Format
Record Format
Earphone Output
Frequency Response
Signal-to-noise Ratio
Total Harmonic Distortion
Radio Frequency Range
Recording Quality
Power Supply
Battery Life
Dimensions (L x W x H)
Weight
Computer
Operating System
USB Host Interface
Capacity*
Reading Speed
(PC configuration
dependent)
Writing Speed
(PC configuration
dependent)
Details
High definition array LCD
MP3/WMA
MP3
7mW +7mW, 32ohm
20Hz ~ 20KHz
>80dB
<0.05%
76 - 108MHz
44.1 KHz Sampling
Size AAA alkaline battery X 1
>10 hours
86.6mm X33.0mmX26.4mm
45g (without battery)
IBM Compatible PC, Notebook or Macwith USB port
Windows 98/Me/2000/XP/Server 2003, Mac OS
10.2 or above
USB Specifications 2.0/1.1/1.0
32MB ~ 512MB
1.0MB/S USB1.1/1.0
3.5MB/S USB2.0
672KB/S USB1.1/1.0
1.1MB/S USB2.0
Volume adjust
Please press
/
to adjust the volume under FM and SCAN status.
RECORD
The LINE-IN recorded files will be automatically saved with the title of “M001,
M002… ” and can be played back under LINE-IN MODE.
Record FM programs
Before recording FM programs, please set the “Source” of “REC-SETUP” to
“FM”, then hold
to start FM program recording, press
again to
pause FM recording, and press
to stop.
VOICE
MP3 Player can record by MIC under the MUSIC/VOICE mode.
The operation of files play and setting is the same as under the MUSIC MODE.
Before record, please set the “Source” of “REC-SETUP” to “Mic”, the record
operation of MUSIC/VOICE mode are as follows:
1)
Please press
to start VOICE record while in stop status. Please
put the
near the sound resource to ensure the record quality.
2)
Please press
again to pause/resume VOICE record, and press
to stop.
LINE-IN
Under LINE-IN MODE MP3 Player can playback FM, MIicrophone or LINE-IN
recorded files, and record output program of connected audio/video device.
Connect the 2.5mm port of LINE-IN Cable to MP3 Player, and 3.5mm port to
audio output socket of any audio/video device.
Note: Under LINE-IN MODE support to record the receiving program as
MP3 synchronously: Record will stop automatically when there is no music
input.
The operation of files play and setting is the same as under the MUSIC mode.
Before LINE-IN record, please set the “Source” of “REC-SETUP” to “LINE-IN”,
the record operation of LINE-IN mode are as follows:
1)
Connect the 2.5mm port of LINE-IN Cable to MP3 Player, and 3.5mm port
to audio output socket of any audio/video device.
2)
Please press
to start LINE-IN record while in stop status.
3)
Please press
again to pause LINE-IN record, and hold
to stop.
Specifications
About some capacity is reserved for programs in MP3 Player, so its actually
capacity may be a little less than the rated one.
POWER SAVINGS
Select “POWER SAVINGS”, press
to enter, and you can set the time of
auto turn off by press
/ as: 1 min, 5 min, 10 min or Disable. After setting,
press
again to go back to SETUP menu.
CONTRAST
Select “CONTRAST”, press
to enter, and you can set the LCD contract
of MP3 Player by press /
. After setting, press
again to go back to
SETUP menu.
FONTS
Select “FONTS”, press
to enter, and you can set the displayed lan-
guage by press / as: ENGLISH, Traditional Chinese, or Simplified Chinese.
After setting, press
again to go back to SETUP menu.
EXIT
Select “EXIT”, press
to exit SETUP mode, go back to main menu of MP3
Player.
REC-SETUP
Under REC-SETUP can select each option of REC-SETUP menu by / , and
set the option by
.
Source
Select”Source”, and you can set the source of record by press
as: