Connecting the adjustable antenna to the card – NetComm NP5420 User Manual
Page 10
Advertising
www.netcomm.com.au
Rev. 1 - YML678
Page 10
NP5420 11G Wireless PC Card User Guide
Connecting the Adjustable Antenna to the Card
After installing the Card on computer, connect external Antenna to the Card from the SMA
connector. Hold the antenna in the desired orientation and then turn the lock nut clockwise until
snug (do not over tighten the nut). To adjust the antenna direction, turn the nut counter
clockwise one full turn, adjust the antenna and then tighten the nut.
After hardware installation is completed, please go to the Driver Installation section and follow
the instructions for your operating system.
Advertising