Napco Security Technologies MAGNUM 825 - Manual (Page 6)

Your Magnum Alert-825/825HS Security System has three basic components:
1. Zones
Your system is capable of
monitoring up to six separate areas
of your premises, including Am-
bush/Panic and Auxiliary zones.
Each zone is an independent cir-
cuit that protects a specific area of
your premises. For example: your
alarm specialist may have set aside
a zone for window protection, exit/
entry delay, interior space protec-
tion, safe and valuables protection
or emergencies. Each zone can be
“programmed’ to react in aspecific
manner. Check and be certain that
you know what each zone protects.
2. The Dlglt-Key Keypad
Lets you program arm/disarm
codes; arm and disarm the system;
check the condition(status) of each
zone; temporarily bypass (shunt)
individual (or group of) zones; send
an ambush alarm; cancel exit/entry
delay; test the battery and alarm
devices; reset the AC-failure indica-
tion; and bypass a
Bypass Zone.
Three lights and a Mini-Sounder
on the Digit-Key keypad monitor
the system.
3. The Alarm Output
When any zone is activated, the
Control Center responds by sound-
ing an audible alarm and/or alerting
a central station (optional). Your
alarm specialist has programmed
your system to react in a specific
manner to each type of emergency.
Be sure you understand how your
system responds to these emer-
gencies.