Nilfisk-Advance America 5 - Manual (Page 7)

6
english
1) Options / model variants
POSEIDON 5
3.4 Connecting the water
supply
1. Rinse the water supply hose
briefly in order to prevent
sand an other dirt particles
entering into the machine.
2. Connect water supply hose
to the machine.
3. Open water tap.

3.5 Electrical connection CAUTION!
When using a cord reel:
1. Release brake of the cord
reel.
2. Unwind the cord completely.
CAUTION!
The cleaner may only be con-
nected to a correctly installed
electrical installation.
NOTE!
See chapter 9.4 Technical Data
for required quantity of water
and water pressure.
In the case of poor water quality
(sand, etc.), we recommend that
a fine water filter is fitted in the
water inlet. We recommend the use of a tex-
tile-reinforced water hose with a
nominal diameter of min. 3/4"
(19 mm).
1. Observe safety instructions
in chapter 1.
2. Put the plug into the electri-
cal socket.
3.6 Antifreeze - before first
use
The machine is protected with
anti-freeze from the factory.
Catch the liquid discharging at first (approx. 1 l) for re-use in a
container.