Optional equipment, How to set up your imaq system – National Instruments PCI-1411 User Manual
Page 16
Chapter 2
Installation
2-2
www.ni.com
Optional Equipment
National Instruments offers a variety of products for use with your
PCI/PXI-1411, including other National Instruments DAQ devices
for enhanced triggering, timing, or input/output.
For more specific information about these products, refer to your
National Instruments catalogue or Web site, or call the office nearest you.
How to Set up Your IMAQ System
Use Figure 2-1 as a guide while you install your software and hardware,
configure your hardware, and begin using NI-IMAQ in your application
programs.
Follow the instructions in the Getting Started with Your IMAQ System
document to install your NI-IMAQ software and IMAQ hardware.
If you will be accessing the NI-IMAQ device drivers through LabVIEW
or BridgeVIEW, you should read the NI-IMAQ release notes and the
NI-IMAQ VI Reference Manual to help you get started.