Connecting your lcd/keyboard – Neuro Logic Systems NLS 1U Server Console RFT-17 User Manual

Page 6

Advertising
background image

17 inch LCD/Keyboard Rack Kit Installation Guide

Connecting your LCD/Keyboard

Step

Detail

! Note: Before connecting the LCD monitor/keyboard to a

KVM or Sun System, all systems should be turned off.

1. The keyboard and trackball’s design allows its use with

most Sun systems. The LCD-17-8P com es with an 8-
pin Din keyboard connector, while the LCD-17-USB
comes with a USB style connector.

2. The monitor uses a standard HD-15 male video

connector. If your Sun system uses a DB13W3
connection, you can use a Sun adapter to interface
between the LCD connector and the Sun system. (PN:
X3872A)

3. Connect the monitor to a power source. The LCD

Monitor’s power supply is auto ranging, and will operate
on AC voltages ranging from 90-264 and 50-60 Hz. The
monitor uses an IEC 320-C14 connector. An adapter will
be required to interface with other connector types.

4. Secure the cables to ensure they will not bind when

operating the LCD/keyboard slide mechanism. Cycle the
tray in and out of the cabinet to ensure there is enough
of a service loop in the cables.


Page 6 of 14

Advertising