Neuro Logic Systems NLS 1U Server Console RFT-17 - Manual (Page 8)

17 inch LCD/Keyboard Rack Kit Installation Guide
press the Menu button at the rear of the LCD panel twice, which will select the Display Mode menu. Note that
deviations of a fraction of a hertz in the displayed refresh rate are not significant.
NOTE: If the monitor self configures to any other resolution, it is likely that the frame buffer has been explicitly
configured to display that particular resolution. If running Solaris 8 or above, use the “fbconfig –defaults”
command to reset the resolution to the default, and then reboot the system. With earlier versions of Solaris, use
the appropriate command for your particular frame buffer (E.g. “ffbconfig – defaults” for the Creator[3D] frame
buffer).
Page 8 of 14