Neuro Logic Systems NLS 1U Server Console RFT-17 - Manual (Page 9)

17 inch LCD/Keyboard Rack Kit Installation Guide
Navigating the Menu
The LCD monitor will auto-adjust at start-up. Although not required, you can make numerous adjustments to your
monitor using the on-screen menu. To access the OSD (On-Screen Display) menu Press the MENU button
located at the top of the LCD monitor.
The table below describes various function controls of the LCD Monitor. The control buttons can be accessed
from the top of the LCD monitor once it has been raised in to the operating position. The OSD menu will
disappear after a pre-set time of no use.
Label Control
Function when not
displaying menu
Function when displaying
menu
MENU Menu button Displays the On-Screen
Display (OSD)
Selects the next page of the
menu
< Brightness/minus Decrease display brightness Decreases or changes value
of the adjustment item
> Brightness/plus Increase display brightness Increases or changes value of
the adjustment item
AUTO/SEL Auto/Select Activates the Auto Adjust
function to obtain an optimum
image
Selects a menu item
Power switch Turn power on and off
manually
Turn power on and off
manually
Page 9 of 14
(on some models the menu panel may be located on the back of the LCD)