Nortel Networks MCC 3100 - Manual (Page 12)

Introduction
12
• Redirect your incoming calls to alternative contact locations (for
example, office, home, other).
• Associate a single number with all of your outbound calls. Use the
following call modes:
— Direct Outbound—This is the basic mode. You can initiate calls
directly from your BlackBerry to other parties by dialing or
selecting friends to call. This direct mode uses an Outgoing Call
Service DN to access the MCG 3100 in the enterprise.The
MCG 3100 then dials the number entered in the MCC 3100 using
the enterprise dial plan.
— Call-me-First—This is a call option in the advanced call mode,
and you can choose many other advanced calling options (for
example, outgoing prefix, calling locations). Call-me-First calls
take two steps to complete. First, the MCG 3100 calls you at a
chosen location. After you answer, the MCG 3100 initiates the
call by calling the number you entered in the MCC 3100 using the
enterprise dial plan.
For more information, see “Call modes” on page 54 .
Note: You must configure your Outgoing Call Service DN in the
MCC 3100 settings before you can use the Direct Outbound call
mode. Your system administrator provides the Outgoing Call Service
DN to allow direct MCC 3100 calling from your BlackBerry.
For more information, see “Initial configuration” on page 25 .
Before you begin
Before you install the MCC 3100 application, complete the following
checklist:
• Install the BlackBerry Desktop Manager 4.2 software and ensure it is
working properly.
• Become familiar with navigation and data entry methods for your
BlackBerry.