Upgrading mcc 3100 for blackberry over the air, Uninstalling mcc 3100 for blackberry, Uninstalling the database – Nortel Networks MCC 3100 User Manual
Page 22: Ils, see
Software installation
22
Upgrading MCC 3100 for BlackBerry over
the air
1.
On the BlackBerry, select Start > BlackBerry Explorer.
2.
Use the following address format to access the software web site:
http://<hostname or IP address>:8080/m
3.
Highlight the software load that you will install.
4.
From the menu, select Get Link.
5.
Click Download.
6.
Click Yes, when prompted if you are upgrading the software.
7.
Acknowledge other licensing and security prompts that may appear
during the process of installing the application on the mobile device.
8.
After downloading is complete, click OK or Run.
Installing or upgrading MCC 3100 for
BlackBerry using the
BlackBerry Enterprise Server
Your system administrator can deploy MCC 3100 for BlackBerry software
by pushing it from the BlackBerry Enterprise Server to your BlackBerry.
The installation or upgrade takes place automatically.
Uninstalling MCC 3100 for BlackBerry
This section describes how to remove the MCC 3100 for BlackBerry from
your device. You can use the Desktop Manager to remove the software,
or you can remove it directly using the BlackBerry main menu.
Uninstalling the database
Uninstalling the application may not erase the application data as
expected. To ensure that the application data is erased, Nortel
recommends that you clear the MCC 3100 database before you uninstall
the MCC 3100 application.