Network Computing Devices Label Printing Scale LSQ-40L - Manual (Page 20)

Below is a list of what you can put on a label.
HEADLINE- Store information
DESCRIPTION- Product name
WEIGHT TEXT- The word WEIGHT
WEIGHT – The weight of the product
PRICE TEXT- The word PRICE
PRICE- The price of the product
TOTAL TEXT- The word TOTAL
INGREDIENTS- Ingredients
BAR CODE- The bar code (usually at the bottom but above add. text)
DATE TEXT- The word DATE
DATE- Today’s date
SELL BY TEXT- The words SELL BY
SELL BY- Expiration date of product
ADDITIONAL TEXT- Usually appears below bar code (Thank you, etc.)
HOUR- Time label printed
AGENT TEXT- The word AGENT
AGENT#- Agents employee number
AGENT NAME- Agents name
SPACE- Line space. Important for spacing over safe handling information
SET UP TEXT ON LABEL:
1). Enter PROGRAMMING MODE.
2). Press PROG FORMAT.
3). Press ENTER when you see FORMAT.
4). Use arrow up/dwn to find LABEL W/ GAP. Press ENTER.
5). Use arrow up/dwn to find CUSTOMIZED. Press ENTER.
6). The next two questions are the width and length of the label. The scale has a
sensor to detect the end of the label, so there is no need to change the dimensions.
Exceeding 56mm width or 99mm in length can cause printer error. Press ENTER 3
times to get to next step.
7). LIN 1 ( ) should be in the display. You can arrow down to program what line
you want to place text on. Press ENTER.
NOTE: If you go past LIN 20, you can print a sample label to preview your layout.
8). Use arrow up/down to justify where you want it one the line. Press ENTER.
Page 20