Network Computing Devices Label Printing Scale LSQ-40L - Manual (Page 21)

9). Arrow up/down to select what text you want placed on the coordinates you
selected. Press ENTER.
10). SIZE (1-6) is displayed. Type font size and press ENTER. (1-sm 6-lg)
11). Repeat steps 7 to 9 until all text has been entered.
12). Press ESC to go back to PROGRAMMING MODE.
ADDING PLU’S:
The list below explains the information needed when adding a new plu.
DESCRIPTION- Product name
CODE- Product identifier number you POS system recognizes
DEPARTMENT- Department number (defined in department table) [Optional]
GROUP- Group of scales [Optional]
PRICE- Price of product by pound or item
TYPE- (See page 10) Press ENTER the select by using arrow up/down. Press Enter
TARE- Type number as defined in TARE table [Optional]
EXPIRATION DATE- Type number of days from today [Optional]
TAX- Must be a whole number [Optional]
INGREDIENTS- Type number as defined in ingredients table [Optional]
1). Enter PROGRAMMING MODE.
2). Press NEW PLU.
3). Enter in the plu number (1 to 300) and press ENTER.
4). Enter the information or you can press ENTER on optional lines.
5). When NEW PLU appears again, you can type in another product or ESC to go
back to PROGRAMMING MODE
KEY ASSIGNATION:
During normal operation of the scale, you can type a plu# and press PLU to pull a
product from memory, or you can use the main keyboard as quick access keys.
However you have to assign the plu’s to a button.
1). Go to PROGRAMMING MODE.
2). Press KEY ASSIGNATION. Press ENTER.
Page 21