Nikon Coolpix S640 - Manual (Page 65)

53
Using Smart Portrait Mode
Taking Pictures of Smi
ling Fa
ces (Sm
art Portrait
M
ode)
B
Notes on Skin Softening
• When taking pictures with skin softening, the time required to save the pictures increases slightly.
• Depending on shooting conditions, even if the camera detects a face on the monitor at the time
of shooting, effects of the skin softening function may not be visible, and areas other than the face
may be processed. If the desired effect is not achieved, set
Skin softening to Off and shoot again.
• The amount of skin softening effect that is applied cannot be set while using the portrait or night
portrait scene modes.
• Skin softening can also be applied to pictures after they have been taken (A 73).
Smile timer
• On (default setting): Among the detected faces, if a smile is detected in the face
that is framed by a double border, the camera automatically releases the shutter.
• Off: The camera does not release the shutter automatically using smile timer; the
shutter is only released when the shutter-release button is pressed.
• When smile timer is enabled, the current setting is displayed during shooting
( A 6). When Off is selected, an icon for the current setting is not displayed.
Blink proof
When set to
On, the shutter is released two times
each time a picture is taken; the camera chooses one
image in which the subjects’ eyes are open, and
saves it.
• The message on the right will be displayed for a
few seconds when the camera records an image in
which someone may have been blinking.
• When set to On, the flash cannot be used.
• The default setting is Off.
• When blink proof is enabled, the current setting is displayed during shooting
( A 6). When Off is selected, an icon for the current setting is not displayed.
A blink was detected in the
picture just taken.