Nikon Coolpix S640 - Manual (Page 94)

82
Connecting to a Computer
Con
ne
cti
ng t
o Te
le
vi
sion
s, C
omputers
and Pri
nters
5
Confirm that the source device is displayed in the transfer options
Source panel and click Start Transfer.
At the Nikon Transfer default settings, all pictures are transferred to the computer.
At the Nikon Transfer default settings, ViewNX starts automatically when transfer is
complete and transferred pictures can be viewed.
For more information on using Nikon Transfer or ViewNX, refer to help information
contained in Nikon Transfer or ViewNX (
A 83).
Disconnecting the camera
Do not turn off the camera or disconnect the camera from the computer during transfer.
When transfer is complete, turn off the camera and disconnect the USB cable.
The camera turns off automatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB cable.
C
Charging the Battery
When the camera’s charge lamp is blinking slowly in green, the battery inserted in the camera is
charging (
A 84).
Start Transfer button Source device