Navigon 7310 - Manual (Page 16)

User’s manual NAVIGON 7310
Switching on the NAVIGON 7310 - 16 -
1. Tap in the N
AVIGATION
window of the navigation software on the
(Exit) button.
2. Tap on Standby.
Automatic Standby
You can configure the NAVIGON 7310 so that the navigation device is
automatically switched to standby mode.
►
In the N AVIGATION window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins, After 20 mins,
After 30 mins).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the (On/Off) key and keep it pressed until the device
switches off. (Approx. 6 seconds)
- or -
1. Tap in the N AVIGATION window of the navigation software on the
(Exit) button.
2. Tap on Off.
Note: When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. The battery can become
flat within a few days.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
3.1 Manual
An excerpt of this manual describing the most important functions of the
navigation software is saved on the navigation device.
To open the manual:
1. In
the N
AVIGATION
window, tap on Options > Manual.
The T ABLE OF C ONTENTS window opens.