Navigon 7310 - Manual (Page 41)

User’s manual NAVIGON 7310
Navigation - 41 -
Note: The starting point (flow number "0") can be neither moved nor
deleted. However you can make another route point into the starting
point.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route point further to the front.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point further to the back.
(Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts you
to confirm deletion.
6.4.4 Managing routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not the
calculated route. When you load a saved route, it must be recalculated
before navigation can start.
You can load, rename or delete stored routes.
Saving routes
The R OUTE P LANNING window is open. You have entered the starting
point and at least one route point.
1. Tap
on Options > Save Route.
2. Enter a name for the route.
3. Tap on Save.
The destination is now saved to the S
AVED
R
OUTES
list. The dialog
window closes.
Loading routes
1. Tap on Options > Saved Routes.
2. Tap on the route that you want to load.
3. Tap on Load Route.
The R
OUTE
P
LANNING
window opens. The starting point and the
route points of the loaded route have been entered.