NordicTrack NTS79020 - Manual (Page 13)

13
31. Attach the Front Shroud (24) to the Top Frame (5)
with two M4 x 16mm Screws (95). Attach the
Front Shroud to the Weight Base (2) with two
M10 x 25mm Button Head Bolts (94).
Attach the Rear Shroud (25) in the same man-
ner.
29
41
56
76
62
101
30
31
41
1
85
102
24
95
5
94
2
25
30. Attach the end of the Press Cable (41) to the indi-
cated bracket on the Base (1) with an M8 x
19mm Button Head Shoulder Bolt (85) and an M8
Nylon Locknut (102).
29. Wrap the Press Cable (41) over a 3 1/2” Pulley
(56). Attach the Pulley to the left “U”-bracket (62)
with an M10 x 46mm Button Head Bolt (76) and
an M10 Nylon Locknut (101).
Seat Assembly