Nexus 21 A1557 - Manual (Page 19)

Document Ref: Nex8inst.doc/Rev0 09.07.00 Page 19 of 30 Originator MC Checked by AC__
has its own DIL switch address setting. These addresses must be set in accordance with the
repeater panel manual. The panel’s own display DIL switch setting must not be changed.
* N U M B E R O F D I S P L A Y S * Displays current status
D I S P L A Y 0 1_
* = E N T E R , # = D E L E T E
5.20 Print Memory Contents
At Step 4 within the Engineer’s Menu (see Section 5.3 above), select 0:EXTENDED MENU.
Select 7: PRINTER MEMORY.
The format of the printer memory report is shown in the short example below:
PANEL NAME
1:063 Z01 BGU FIRE
00:02:35 01/01/98
ALARMS SILENCED
00:02:42 01/01/98
SYSTEM RESET
00:02:45 01/01/98
5.21 Print Cause and Effect Data
At Step 4 within the Engineer’s Menu (see Section 5.3 above), select 0:EXTENDED MENU.
Selecting 8: PRINTER C/E DATA will print all local cause & effect information.
5.22 Options Available at Access Level 3
At Step 4 within the Engineer’s Menu (see Section 5.3 above), select 0:EXTENDED MENU.
Three options are available:
1) Edit Local Cause/Effect
2) Edit Network Cause/Effect
3) Print Network Cause/Effect
Select 9: EDIT C/E DATA.
To change number of displays
To accept number of displays