NEC pmn - Manual (Page 17)

Brightness and Contrast
Brightness: Adjust the overall image and background screen brightness.
Contrast: Adjust the image brightness in relation to the background.
Auto Adjust Contrast: Corrects the image displayed for non-standard
video inputs.
Auto Adjust
Allows automatic adjustment of the position and image adjust control.
Position
Control horizontal and vertical image position within the display area of
the LCD.
Auto Adjust Position: Automatically sets the horizontal and vertical
image position within the display area of the LCD.
Image Adjust
Coarse: Adjust the horizontal size by increasing or decreasing the
Coarse total.
Fine: Improves focus, clarity and image stability by increasing or
decreasing the Fine total.
NOTE: The Image Adjust Fine control must be used to complete the
setup of your MultiSync LCD
2000 monitor.
Auto Adjust Coarse/Fine: (MultiSync LCD 400 monitor only) Auto-
matically adjusts the Coarse or Fine settings.
Auto Adjust Coarse: (MultiSync LCD
2000 monitor only) Auto-
matically adjusts the Coarse setting.
Color Control System
Colour presets 1 through 5 selects the desired colour setting. Each
colour setting is adjusted at the factory to the stated degree Kelvin. If a
setting is adjusted, the name of the setting will change from degree
Kelvin to Custom. Color Gain (Red, Green, Blue): Increases or
decreases red, green or blue colour portion depending upon which is
selected. The change in colour will appear on screen and the direction
(increase or decrease) will be shown by the colour bars.
E - 10 Controls