Nortel Networks NN-10300-014 - Manual (Page 20)

About the IP Audio Conference Phone 2033
20
Soft keys
The IP Audio Conference Phone 2033 has three soft keys. A maximum of
ten functions can be assigned to these soft keys. Your system
administrator assigns functions to the soft keys in layers.
Use the Shift (>>) key to navigate the layers of soft keys. If there are only
three functions assigned to the soft keys, the Shift (>>) key does not
appear and all three functions are displayed.
Figure 4 shows the soft keys on the display area.
Figure 4: Soft keys
The soft key label has a maximum of six characters. Each soft key
includes the soft key label and an icon. When a soft key is in use, a
flashing icon displays at the beginning of the soft key label, and the label
shifts one character to the right. (If the label is six characters long, the last
or rightmost character is truncated.) If a soft key is enabled, the icon state
changes to On. It remains in the on state until the soft key is pressed
again. This cancels the enabled soft key and turns the icon off, returning
the soft key label to its original state.
Telephone status indicators
The IP Audio Conference Phone 2033 uses three bi-color LED lights,
located around the speaker, to indicate the telephone status.