Nortel Networks NN-10300-014 - Manual (Page 39)

Make a call
39
To use Last Number Redial:
Use Speed Call
Use the Speed Call feature to place internal and external calls by dialing a
one-, two-, or three-digit code.
To create a Speed Call number:
Press the Line (DN) key twice (the last
number dialed is automatically redialed).
1. Press the Speed Call Controller
(SpcCtl) key. The triangular icon
flashes, indicating programming mode.
2. At the prompt:
— Enter a one-, two-, or three-digit
code (0-999).
— If required, enter the access code
(for example, “9”).
— Enter the telephone number
(internal, external, or long-distance
number).
3. Press the Speed Call Controller
(SpcCtl) key again to save the code and
number. The icon quits flashing.