NEC 2400IPX - Manual (Page 26)

TO TRANSFER A CALL
◆ After conversing, ask party to hold.
◆ Press Transfer .
Receive interrupted
dial tone.
◆ Dial destination
station’s extension,
hang up or wait for
answer.
◆ If transferring party
hangs up, that
station’s number
appears in the center
of recipient’s display. (Time Display)
DDD 3 2000 TRANSFER
Transferring station
2001
(Time Display)
TRANSFER
Transferred station
or trunk number
(Time Display)
TRANSFER
28
I
F UNANSWERED
◆ After preprogrammed time, Automatic Recall
is initiated.
◆ Visual and audible signal (rapid flash and ring
burst) is sent to station which placed call on
Exclusive Hold.
Recall shows as a flashing
green LED on your phone, and solid red on
other phones with same line.
Note: Exclusive Hold excludes any other phone
from picking up your held call. Exclusive Hold
shows as a flashing green LED on your phone. The
same line on other phones appears as a solid red LED.
*NEC-405 NEAX2400 UG #2 1/22/03 2:42 PM Page 28