NEC 2400IPX - Manual (Page 33)

CALL FORWARDING –
ALL CALLS
T
O SET
◆ Press Speaker . Receive dial tone.
◆ If setting for another station, press
MULTILINE APPEARANCE .
◆ Press FWD or dial “Call Forwarding – All
Calls” access code. Receive special dial tone.
◆ Dial destination station or external telephone
number. Receive service set tone.
◆ FWD LED lights (at your station or at the
Dterm of the multiline station you are setting).
◆ Press Speaker.
Call Forwarding –
All Calls is set.
(Time Display)
2000 FORWARD SET
Forwarding
station
U
SING THE
S
OFT
K
EY
◆ Press FDA Soft Key. Receive special tone.
◆ Dial destination; wait for service set tone.
◆ “FORWARD SET”
is displayed, Call
Forwarding for all
calls is set.
T
O VERIFY
(
WITH
D
TERM
8D/16D/32D)
◆ Press FWD .
◆ Display indicates the station number calls are
forwarded to.
Note 1: If recipient
station is a Dterm
8D/16D/32D,
LCD displays:
Note 2: With Soft Key operation, FDB flashes on
the display.
(Time Display)
2000 FORWARD
Forwarding
station
MIC >>>
(Time Display)
FORWARD SET
38
*NEC-405 NEAX2400 UG #2 1/22/03 2:42 PM Page 38