Service, Frequency response, Specifications using the foam windscreen – Nady Systems CM-2S User Manual

Page 2: Polar pattern

Advertising
background image

SERVICE

(U.S.) Should your Nady microphone require service, please contact the Nady Service Department via telephone at (510) 652- 2411 or

e-mail at [email protected]. (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer

from whom you purchased this product.

FREQUENCY RESPONSE

Date of purchase _____________________________________________________________________________________________

Dealer’s Name ______________________________________________________________________________________________

Street ______________________________________________________________________________________________________

City ____________________________________ State _____________________ Zip _____________________________________

Note: Do not attempt to service this unit yourself as it will void your warranty.

03/09/04

Specifications and design subject to change for improvement purposes without prior notice.

SPECIFICATIONS

USING THE FOAM WINDSCREEN

The foam windscreen, supplied with the CM-2S, fits over the grill portion of the microphone and is designed primarily to decrease bass

rumble (from wind noise pickup) during outdoor live or recording use. It is also useful in keeping mouth spray out of the microphone

head. (Note: Be aware that the foam windscreen will slightly attenuate the high frequency response of the microphone.)

(WARNING: The capsule is the heart of the condenser microphone. If the elements become

s dirty or wet, the sound will be degraded.

Never spray any liquid on the microphone head. Always use a foam windscreen or pop filter if you talk or sing close to the microphone

grill screen.)

ELEMENT:

Fixed-charge back plate permanently polarized

condenser

POLAR PATTERN:

Cardioid (Unidirectional) stereo

FREQUENCY RANGE:

30 to 20,000Hz

LOW-FREQUENCY ROLL-OFF:

150Hz, 6dB/octave

SENSITIVITY:

-45dB (5.6 mV) re 1V at 1 Pa

IMPEDANCE:

< 250 Ohms unbalanced

CHANNEL BALANCE:

< 2.5dB

MAX. SPL (1% THD @1000HZ):

128dB

S/N RATIO re 1Pa:

70dB

DYNAMIC RANGE (TYPICAL):

101dB, 1kHz at Max SPL

BATTERY TYPE:

AA alkaline battery

BATTERY LIFE:

More than 1000 hrs

SWITCH:

Off, flat response, low-roll-off

SIZE:

Diameter: 0.83" (21.0mm), Length: 7.76" (197.0mm),

Width: 2.44" (62.0mm),

NET WEIGHT:

5.8 oz (165 g)

LEGEND

Roll-off

12" or more on axis (flat)

Frequency in Hertz

10 dB

20k

10k

5k

2k

1k

500

200

100

50

POLAR PATTERN

1 kHz

LEGEND

1 kHz

RIGHT

LEFT

SCALE IS 5 DECIBELS PER DIVISION

90

°

60

°

120

°

30

°

150

°

210

°

240

°

270

°

300

°

330

°

180

°

0

°

Advertising