Nikon Transparency Unit - Manual (Page 16)

4 Nikon Transparency Unit User’s Manual
Unlocked
Entriegelt
Déverrouillé
Lock the Optical Assembly
When transporting or shipping the transparency
unit, be sure to re-lock the optical assembly to
avoid damage.
Before re-locking the assembly, make sure the
optical assembly of the unit is in the “Home
Position” by doing the following:
Step 1
If the scanner is powered on, turn the scanner
off.
Step 2
Turn the scanner's power back on.
Step 3
Wait for the scanner's Ready, Power, and
Option indicators to light.
Step 4
Turn the scanner off again. The optical
assembly should be in the Home Position.
To lock the optical assembly, move the plastic
slider until the mark points to the Locked
symbol.
Unlock the Optical Assembly
Step 1
Separate the transparency unit from its protec-
tive styrofoam moulding and plastic wrapping.
Step 2
Locate the slider lock on the underside of the
unit near the back.
Step 3
Move the plastic slider until the mark points to
the Unlocked symbol, as shown below.
2. Unpacking
Optical Assembly Slider Lock
Schiebeverschluß für die optische Einheit
Curseur de verrouillage du bloc optique
Locked
Verriegelt
Verrouillé