Nortel WLAN IP 2210 - Manual (Page 21)

Chapter 2 WLAN Handsets overview 21
WLAN IP Handset 2210/2211/2212 User Guide
8 Scroll to one of the desired options:
• Off — ringer is turned off.
• PBX — ringing uses the distinctive ringing pattern sent to the handset from the call server.
• Continuous — ringing is continuous.
• Short Pulse — ringing occurs in short bursts.
• Long Pulse — ringing occurs in long bursts.
9 Press the Select button (or OK ) to select the highlighted option.
10 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To select the Ring Tone
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options .
3 Press the Select button (or OK ) to select Ring Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring .
5 Press the Select button (or OK ) to select Telephone Ring .
6 Press the Up and Down buttons to scroll through the menu and highlight Ring Tone .
7 Press the Select button (or OK ) to select Ring Tone .
8 Scroll to one of the desired options:
• Tone 1
• Tone 2
• Tone 3
• Tone 4
• Tone 5
9 Press the Play soft key to preview the tone.
Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.