Nortel WLAN IP 2210 - Manual (Page 25)

Chapter 2 WLAN Handsets overview 25
WLAN IP Handset 2210/2211/2212 User Guide
6 Press the Up and Down buttons to scroll through the menu and highlight one of the following
settings:
• Enable Tones (default)
• Disable Tones
7 Press the Select button (or OK) to select the highlighted setting.
8 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To select the Warning Tones
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Phone Options .
3 Press the Select button (or OK) to select Phone Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Warning Tones .
5 Press the Select button (or OK) to select Warning Tones .
6 Press the Up and Down buttons to scroll through the menu and highlight one of the following
settings:
• Enable Warnings (default)
• Disable Warnings
7 Press the Select button (or OK) to select the highlighted setting.
8 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To select the Display Contrast
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Phone Options .
3 Press the Select button (or OK) to select Phone Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Display Contrast .
5 Press the Select button (or OK) to select Display Contrast .
6 Press the Up and Down buttons to increase or decrease the contrast.