Iii. advanced – NetComm Wireless Network Device NP643 User Manual
Page 17
Advertising
NP643 IEEE 802.11g PC Card Adapter
17
YML786 Rev1
III. Advanced
In the Advanced page you can configure advanced settings for the 108Mbps wireless LAN
PC card.
Field
Description
Encryption:
There are four options available: Disable (WEP), Enable
(WEP), WPA and WPA-PSK. The default setting is set to
“Disable”. Enable and Disable refer to WEP data encryption
feature. If Enable is selected, you will be required to select the
Authentication mode from the drop down list. If WPA is selected,
configuration is enabled. Select the “configuration” button.
You will then be prompted with the following pop up window.
Advertising