Navigon 3100 - Manual (Page 15)

User’s manual NAVIGON 3100 | 3110
Navigation - 13 -
If another window is open, tap the (Back) button. The previous
window will open.
Tap repeatedly on the (Back) button until the M AIN WINDOW
opens.
4.2 Specifying a new destination
New destinations for MobileNavigator are all destinations that you
have not yet navigated, or you have not yet stored.
You can enter an address here, select a special destination, or select a
destination from the quick search function.
If you are entering a new destination for the first time, the C
OVERED
COUNTRIES list opens.
Tap on the country, in which your destination lies.
4.2.1 Specify destination country
Above the right-hand upper corner of the uppermost entry field of the
window A
DDRESS
, POI
IN A
C
ITY
, and POI
OF
N
ATIONAL
S
IGNIFICANCE
, is
the Country button. It shows the country code of the country from which
current navigation destinations can be entered.
If your destination is in a different country, then proceed as follows:
1. Tap on the Country button.
The C OVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
The C OVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
4.2.2 Address of destination
1. In the M
AIN WINDOW
, tap on New Destination > Enter an Address.
The A DDRESS window opens.
2. Enter the name of the town or the postcode.
3. Enter the name of the street. You can also enter the name of a well-
known building, e.g. "Olympic stadium" or "Eiffel tower".