Navigon 3100 - Manual (Page 24)

User’s manual NAVIGON 3100 | 3110
- 22 - Routes with various stages
If you want to enter a different starting point:
2 Tap on the corresponding button.
3. Enter the starting point according to the relevant section in chapter
"Navigation" on page 11.
4. Tap the button Set Starting Point.
The selected starting point will now be shown next to button 0
(Starting Point).
Change the starting point
▶ Tap Specify Starting Point.
The S TARTING P OINT menu opens. You can now enter a different
starting point. Proceed as described above.
6.1.2 Enter route stages
Route stages are points within the route that you want to navigate to.
In front of every route stage is its flow number on a button.
1. Tap on the field Add Route Point.
The R
OUTE
P
OINT
menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route stage. (See the corresponding section of chapter
"Navigation" on page 11).
4. Tap Add.
The selected route stage will now be shown next to its flow number.
Repeat this step for each additional destination that you want to add to
your route.
6.1.3 Edit route stages
Route stages can be deleted from a route. The order of the route stages
can be varied as you wish.
Note: The start point (flow number "0") can neither be moved or
deleted.
▶ Tap on the route stage that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route stage forwards
(Example: route stage 2 becomes route stage 1)