Navigon 3100 - Manual (Page 27)

User’s manual NAVIGON 3100 | 3110
Options - 25 -
No GPS reception
When the received GPS signal is not sufficient, the following message
appears:
"No GPS signal available at present. Would you like to use the last
known position?"
You have the following possibilities:
▶ Tap OK. The route will be calculated using the last known position
as the starting point. As soon as the GPS reception is sufficient for
determining the position, the route will be re-calculated and you can
begin the navigation.
▶ Tap the Cancel button. The M
AIN WINDOW opens. The destination is
now saved to the L
AST
D
ESTINATIONS
list.
7 Options
Some windows have options which lead to further functions.
▶ Tap on the Options button to open the options list.
▶ Tap on the options you would like to implement.
▶ If you would like to quit the options list without selecting an option,
tap on the Options button again.
Delete All: Deletes all destinations from the L AST D ESTINATIONS list. The list is
then empty. A dialog box prompts you to confirm.
Save as Favourite: Saves the given destination to the F AVOURITES list.
For detailed information, please refer to chapter "Saving a destination"
on page 20.
Show on Map: Shows the given address on the map.
Settings: Opens the S
ETTINGS
window. Here you can configure the navigation
system.
For detailed information, please refer to chapter "Configuring
MobileNavigator" on page 35.
Saved Routes: Opens a dialog window with which you can load a stored route.
GPS status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save data regarding your
current location.
For detailed information, please refer to chapter "GPS status" on
page 33.