Nostalgia Electrics LPM-529 - Manual (Page 8)

USING YOUR LARGE POPCORN MACHINE™
1. First, find a flat surface near an electrical outlet before starting. (Make
sure your cord is away from any water source. If needed, it is acceptable
to use an extension cord.)
Gather your popcorn making supplies; popcorn, seasonings, bowls or bags
for holding the popcorn, cooking oil, measuring cup and spoon. (See parts
listed separately with assembled instructions).
2. Plug in your unit in the OFF position.
3. Make sure top unit
is properly placed on a
solid surface.
4. Make sure kettle motor
is plugged in.
5. Turn unit ON with swtch
at crown of machine. Allow
the unit to run for 3 – 5
minutes to heat up kettle.
Turn unit OFF.
6. By using the 1-Tbs. oil
Measuring spoon supplied
with your LARGE POPCORN MACHINE™, add your favorite popcorn
cooking oil to the kettle.
7. Then by using the
cup popcorn-measuring cup supplied, add popcorn
to the kettle.
8. Turn the unit ON, close the door. In no time at all, you can hear the
popping begin. Then fresh hot popcorn will begin to burst out of the flip lids
on the kettle, just like at the theater!
When popping sound obviously slows down or stops, turn the unit OFF. Flip
the kettle over (see page 7) to empty the kettle. Repeat steps 6 thru 8 until
desired amount of popcorn has been popped.
6
7