Nortel Networks COOLPIX S8000 - Manual (Page 30)

18
First Ste
p
s
Setting Display Language, Date, and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
2
Use the rotary multi selector to
choose the desired language and
press the
k button.
For information on using the rotary multi
selector, see “The Rotary Multi Selector”
(
A 9).
3
Choose Yes and press the
k button.
If No is selected, the date and time will not be set.
4
Press the rotary multi selector
J or K to select
your home time zone ( A 130) and press the
k button.
D
Daylight Saving Time
If daylight saving time is in effect, press the rotary multi selector H
in the time zone selection screen displayed in step 4 to turn on the
daylight saving time option.
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
press
I.
Yes
No
Set time and date?
Date
Cancel
Back
L o n d o n
C a s a b l a n c a
Back
L o n d o n
C a s a b l a n c a