Nortel Networks COOLPIX S8000 - Manual (Page 35)

23
Step 1 Turn the Camera On and Select A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Indicators Displayed in A (Auto) Mode
• The indicators and photo info displayed during shooting and playback will turn
off after a few seconds (
A 131).
• When the monitor has turned off in standby mode to save power, press the
following button to reactivate it (
A 137).
- Power switch, the shutter-release button, A button, or
b (movie-record)
button
D
Functions Available in A (Auto) Mode
• The flash mode ( A 30) can be adjusted, the self-timer (A 33) and macro mode (A 34) can be
applied.
• Brightness (exposure compensation), hue, and vividness can be adjusted using the creative slider
( A 35).
• Press the d button to specify settings for all shooting menu items (A 41) according to
shooting conditions.
D
Vibration Reduction and Motion Detection
• See Vibration reduction ( A 133) or Motion detection (A 134) in the setup menu (A 124)
for more information.
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
88
Shooting mode
A displayed in A
(auto) mode.
Image mode
The combination of image
quality (compression) and image
size is displayed. The default
setting is k 4320 × 3240. Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 32 MB).
When a memory card is inserted in the camera, C
does not appear and images will be stored on the
memory card.
Movie options
A movie option is displayed
for movie recording (
A 107).
Pressing the
b (movie-record)
button enables to start movie
recording (
A 104).
Vibration reduction icon
Vibration reduction can be
applied to reduce the effects
of camera shake.
Motion detection icon
The effects of the subject
movement and camera
shake are reduced.