NETGEAR ADSL Modem DM602 - Manual (Page 47)

Reference Manual for the Model DM602 ADSL Modem
Advanced Configuration of the Modem 5-7
LAN IP Setup
The LAN IP Setup menu allows configuration of LAN IP services such as DHCP. From the Main
Menu of the browser interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup
menu, shown in
Figure 5-6
Figure 5-6. LAN IP Setup Menu
The modem is shipped preconfigured to use private IP addresses on the LAN side, and to act as a
DHCP server. The modem’s default LAN IP configuration is:
• LAN IP addresses—192.168.0.1
• Subnet mask—255.255.255.0
These addresses are part of the IETF-designated private address range for use in private networks,
and should be suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in this menu.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Note: If you change the LAN IP address of the modem while connected through the
browser, you will be disconnected. You must then open a new connection to the new IP
address and log in again.
Table 5-4. Modem Statistics Fields (continued)
Field Description
DM602.book Page 7 Monday, August 12, 2002 6:09 PM