NordicTrack ELITE NTL15007.0 - Manual (Page 8)

8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Remove the wire tie from the Upright Wire
Harness (75).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71).
See the inset draw-
ing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again.
IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON. 71
Console
Assembly
4
75
74
5. Insert the brackets on the Handrails (99) into the
Uprights (73, 74). Make sure that no wires are
pinched.
73
5
74
99
75
73
99
71
Wire
Tie