NEC SP5008A - Manual (Page 20)

19
Register or Unregister to SIP Proxy
Account Input the SIP Proxy registration account ID.
Number Input the phone number.
Password Input the password of IP Proxy registration account ID.
Display name Specify the Display name of the phone number
Forward Specify the Representative forwarding type to be used, only
choose busy
Forward Number Specify the number to be forwarded when the specified
forward condition is met.
Ring Type Select the Ring Type of representative number. You can
choose the following:
z Serial ring (Follow the ring priority defined
below)
z Simultaneous(ring all)
Ring Time (s) for Serial ring Specify the Ring Time for Serial ring
Status Displays the registration status, whether it is registered or not.
Priority Select the group of representative number, and specify the
priority.
Only the checked line will become the member of the
representative number.
The default setting L1~L8 is grouped.
1. Enter the IP address and port number of the SIP proxy into the Primary proxy
address and Port fields. Press the “Apply” button to save changes.
2. Press the “Reboot” button to apply the changes.