NEC SP5008A - Manual (Page 53)

52
3.3 Management
3.3.1 Provision Server
Note: If you need this requirement, Please contact MICRONET for availabilities.
Provision server Mode Enable/Disable provision function
Provision server IP address Specify the Provision Server’s IP address.
Provision server port Specify the Provision server port
Provision cycle time Specify the cycle time of the provisioning.(unit: sec)
Provision default time Specify a scheduled time in a day
1. Press the “Apply” button (at the bottom) after you finish to save
changes.
2. Press the “Reboot” button to apply the changes.