Nikon XT100 - Manual (Page 39)

39
10. MANUAL MODE
In this mode to create a 3D series the turnta
ble with an object on it should rotate after
each shot by means of the remote control.
The turntable may rotate both clockwise and
counter clockwise at your option. The direc
tion of rotation is prescribed by pressing the
corresponding button on the remote control.
IMPORTANT: Operation in Manual Mode re
quires the turntable connection to Remote
Control only. The Turntable Sync Cable
should be disconnected from the jack “M” on
the control panel.
To shoot in Manual Mode proceed as follows:
1. Switch on the turntable by pressing the red
ON/OFF (I/O) button on the power panel.
2. Choose «М» mode by pressing the «Mode»
button.
Figure 10.1
Figure 10.2
10.
M
ANUAL
MODE